آموزش ساخت کلاه Deadmau5

[RmaN]

البته این تاپیک یه جورایی نمادین هست بیشتر تا عملی :-d

تنها كاربران عضو مي توانند لينك ها را مشاهده كنند.

تنها كاربران عضو مي توانند لينك ها را مشاهده كنند.

So you're a HUGE Deadmau5 fan and have been aching to get your hands on one of those sweet Mau5 heads - but NOT one like some of those epic fail's you've seen some people wear... you want a legithead that will be envied by all. Well, I'm here to help. The process is long, it takes a huge amount of determination and patience, but I promise you, in the end, you will have the sikkest Mau5head of any you've ever seen!

Alright, LET'S GO!!!!


Materials:
14” acrylic lamp post globe with 5.5” neckless opening – any color تنها كاربران عضو مي توانند لينك ها را مشاهده كنند.
6” acrylic lamp globe – white تنها كاربران عضو مي توانند لينك ها را مشاهده كنند.
4’x8’ Dow blue extruded polystyrene Styrofoam sheet 1/2” thickness
12” fully threaded rods 8/32” diameter (4pcs)
1 ¼” fender washers (4pcs)
8/32” wing nuts
Professional grade ratcheting hard hat
Lighting for eyes, can use LED’s – I use EL wire from تنها كاربران عضو مي توانند لينك ها را مشاهده كنند.
2yds fabric – 4 way stretch is best
Hot glue gun and glue sticks
Liquid Nails for foam adhesive and applicator gun
Stitch witchery
Clothes steamer
Ball end sewing pins
Dremel with bits for cutting, sanding, and drilling
Jigsaw or open ended hacksaw
Fabric measuring tape
Scissors
Single-edge razor blades
Small jaw clamps
Metal Mesh Food Cover Dome
Nylon tights or sheer chiffon for mouth
Electrical or duct tape
Poster board
Sharpie marker
Safety Glasses
Protective Gloves
Wire cutters
Rubbing Alcohol
Black Spray Paint


Getting Started:

Before you begin building your own Mau5head, there is one thing I cannot stress enough, take a great deal of time in the beginning to PLAN. Not only are the collective materials needed an investment, but to create your head properly, it will also take a lot of time – you want your final product to be worthy of all the blood, sweat, and tears that go into its creation! Find a few reference pictures to work from for inspiration and keep those at your work desk, it will help you to visualize along the way, as the head won’t look like much until it all comes together in the end.

For the most accurate replica, a 14” acrylic globe should be used, however if you are very petite a 13” could be used, or if you’re of a larger build you may consider a 16” globe, but in most cases the 14” will be ideal. My measurements are based off of a 14” diameter globe, if you should use a different size, please keep this in mind and adjust your measurements accordingly.